A service of Tower & Scrubber Solutions · Serving the Bay Area & Northern California

Industrial & HVAC cooling towers · Since 1984

Cooling Tower Repair That Gets You Back to Design Capacity

Structural, mechanical and fill repairs for every major tower brand across the Bay Area and Northern California. We inspect, quote, source OEM or aftermarket parts and rebuild, so your tower runs reliably for years, not just until the next failure.

The short answer

What does cooling tower repair include?

Certified. Compliant. Proven.

Cooling tower repair restores a tower’s structure, mechanical equipment and heat-transfer components to working condition. It typically covers structural members and casing, fans, gearboxes, motors and drive shafts, fill media, drift eliminators, distribution systems and basin leaks. A repair starts with an inspection report that ranks problems by risk and cost.

Most towers can be repaired for a fraction of replacement cost. The key is knowing which components are close to failure and which still have years left, and that comes from an honest inspection, not a sales pitch.

The short answer

6 signs your cooling tower needs repair

If your team is seeing any of these, repair is overdue, and every week costs you in energy, water and risk.

01

Vibration or new noises

Grinding, knocking or shaking points to fan, gearbox, bearing or drive shaft wear.

02

Leaking basin or casing

Water loss, wet ground or rust streaks mean failing seams, joints or panels.

03

Sagging or broken fill

Collapsed or brittle fill cuts heat transfer and can block airflow entirely.

04

Excessive drift or splash

Damaged drift eliminators waste water and spread aerosols around your site.

05

Corrosion or rot

Rusted steel, decayed wood or cracked FRP compromise structural safety.

06

Can't hold design temperature

If cleaning didn't fix a high approach, a component has likely failed.

Why Tower & Scrubber Solutions

Engineering Over Maintenance.

General mechanical contractors treat towers and scrubbers as an afterthought. We specialize in the heavy, hazardous work they avoid — for data centers, biopharma, and hospitals.

SPECIALIZED

Heavy Work, Single Vendor

Turnkey restoration and retrofit under one crew — no subcontractor handoffs, no scope gaps between trades.

MEASURABLE

Immediate Energy ROI

Restored static pressure lets fans ramp down from 100%. Approach temperatures drop and energy cost follows.

AUDIT-READY

100% Compliance Docs

Every job hands over a full compliance report — the "After" isn't just clean, it's documented back to design spec.

Repair services

Cooling tower repairs we handle

From a single failed gearbox to a full cell rebuild, on factory-assembled and field-erected towers in steel, wood, concrete and FRP.

Basin Restoration

Marine-grade epoxy basin coatings over prepped, corrosion-arrested steel — returned to design spec, not just cleaned.

Structural Steel Repair

Weld repair, member replacement, and reinforcement of degraded tower framing and support structures.

Fill & Drift Replacement

New fill media and drift eliminators restore static pressure — so fans ramp down and approach temps drop immediately.

Emergency Repair

24-hour mobilization for mission-critical condenser-water and emissions systems that cannot go offline.

Compliance & Testing

Full compliance report with before/after data that satisfies ASHRAE 188 and corporate safety audits.

Restoration Outcomes

Before. After. Engineered.

Decision guide

Should you repair or replace your cooling tower?

Repair is usually the better value when the structure is sound. Replacement makes sense when structural damage is widespread or the tower can no longer meet your load.

Factor Repair is likely right Consider replacement
Structure
Localized corrosion or damage
Widespread structural failure
Capacity
Tower still matches your cooling load
Load has grown beyond tower design
Cost
Repairs well below replacement cost
Repairs approach replacement cost
Downtime
Repairs can be phased cell by cell
Planned outage window is available
Parts
OEM or aftermarket parts available
Model obsolete, parts unavailable
Who we repair for

Cooling tower repair for industrial & HVAC facilities

From office complexes to process plants, we plan repairs around what the tower keeps running.

Data centers

Phased repairs that keep cooling redundancy in place.

Hospitals & healthcare

Repairs coordinated with facilities and infection-prevention teams.

Semiconductor

Fast mechanical response where process cooling can't drift.

Manufacturing & industrial

Process cooling cleaned around production schedules to avoid unplanned stops.

BioPharma & life sciences

Documented procedures that fit regulated, audit-ready environments.

Commercial & government

Lower chiller energy use and fewer tenant comfort complaints.

FAQ

Cooling tower cleaning FAQs

What’s the difference between cooling tower repair and cleaning?

Cleaning removes buildup; repair and restoration returns the system to design spec. We rebuild, reinforce, and recoat — marine-grade epoxy basin coatings, structural steel repair, and fill/drift replacement — extending asset lifecycle by 10+ years. Routine cleaning is handled by our sister division, WaterSystems Cleaning.

Yes. Every job hands over a full compliance report with before/after data that satisfies ASHRAE 188 and corporate safety audits — 100% compliance documentation on every project.

New fill media and drift eliminators restore static pressure. With that restriction gone, fans can ramp down from 100% and approach temperatures drop immediately — lowering energy consumption.

Yes. We serve data centers, biopharma, and hospitals with 24-hour emergency response and phased execution planning for condenser-water and emissions-control systems that must stay in service.

Yes. TSS holds California CSLB License #1156939, our crews are HAZWOPER-40 certified, and we maintain a record of 0 recordable safety incidents.

Yes. Tower & Scrubber Solutions is Avetta and ISN (ISNetworld) verified — so we meet the contractor prequalification and safety compliance requirements of data centers, biopharma, and hospital facilities before we ever mobilize.

Headquartered in San Jose, California, TSS serves cooling tower and wet fume scrubber sites across the Bay Area and beyond. Call (408) 419-1545 to confirm coverage for your site.

Scroll to Top

Get In Touch

Request an Engineering Audit

Tell us about your system. We’ll handle the rest.